Yamal LNG, Russia
Detailed Engineering · 3D · TECHNIP
Loading 0%
Oil & Gas
Detailed engineering and 3D modelling for refineries, LNG and offshore platforms.
Energy projects demand engineering that holds up under scrutiny. Process-adjacent buildings, electrical and instrumentation, piping and fire & gas systems are designed to international code and modelled to fabrication detail.
Our Oil & Gas team supports operators and EPC contractors across refineries, LNG plants and offshore platforms, delivering detailed engineering and high-LOD 3D models for some of the sector's most demanding clients.
What we deliver in oil & gas
Architectural and Engineering Design
The full discipline set for energy and marine assets, from FEED through detailed design: piping and pipelines, structural for onshore, offshore and marine, electrical, instrumentation and control, telecoms and ELV, HVAC, fire protection, fire & gas detection, safety and risk, and marine engineering — delivered to international code with construction, commissioning and asset-integrity support behind it.
- Piping Engineering (stress analysis, pipe support design, material specification)
- Structural Engineering (onshore, offshore & marine)
- Electrical Engineering
- Instrumentation & Control Engineering
- Telecommunications & ELV Systems
- HVAC Engineering
- Fire Protection & Loss Prevention Engineering
- Fire & Gas Detection Systems Engineering
- Safety & Risk Engineering
- Pipeline Engineering
- Marine Engineering
- Front-End Engineering Design (FEED)
- Asset Integrity & Life Extension Studies
- Construction Engineering Support
- Commissioning & Start-up Support
- Drawing & Documentation Services
- Independent Engineering & Peer Review
- Value Engineering
- Cost Consultancy & Commercial Services
BIM & 3D Modelling
Fabrication- and construction-ready models across the full LOD range, up to LOD 500. Plant, piping, equipment and structure are modelled and clash-resolved in one federated model, so quantities come off the model and site gets geometry it can build to — as delivered on Yamal LNG and the Duqm Refinery.
- LOD 100–500 modelling
- Plant, piping & equipment models
- Structural & marine models
- Clash detection & clash-free routing
- Model-based quantity extraction
- As-built & handover models
CAD Drafting
CAD drafting for energy-sector projects: concept, GFC/IFC detail, shop, fabrication and as-built drawings, plus isometrics and support details — produced to project and client standards, with drawing registers and revision control maintained across the job.
- Design drawings (concept / schematic)
- Detail drawings (GFC / IFC)
- Shop & fabrication drawings
- Piping isometrics & support details
- As-built drawings
- Drawing registers & revision control
Detailed Engineering Design
The engineering that turns an approved concept into something a contractor can build: design basis and specifications, discipline calculations, datasheets, layouts, P&IDs and single-line diagrams, taken to construction issue with vendor documents reviewed and take-offs priced against the same model.
- Design basis & specifications
- Datasheets & material requisitions
- Discipline calculations
- Layouts, GA & installation drawings
- P&ID, SLD & schematic development
- Vendor document review
- MTO & BOQ preparation
Detailed Project Reports
Detailed Project Reports for energy and industrial developments — technical feasibility, concept design, CAPEX and OPEX estimates, execution schedule and regulatory review compiled into a single report an owner or lender can make a decision on.
- Technical feasibility
- Concept design & design basis
- CAPEX & OPEX estimation
- Schedule & execution planning
- Risk & regulatory review
- Approval-ready report compilation
Tendering & MTO
Fabrication-grade material take-offs, BOQ and tender documentation from high-LOD models, ready for procurement and construction planning.
- Fabrication MTO
- Bill of quantities
- Tender documentation
- Cost estimates
Walkthrough Videos
Construction walkthrough videos from high-LOD plant models that communicate sequence, access and constructability to site teams.
- Construction walkthroughs
- Sequence & access animation
- 3D plant flythroughs
CFD & FEA Analysis
CFD analysis for enclosed plant and offshore modules, backed by hydraulic calculations and ETAP power-system studies where airflow and safety margins are tightly governed.
- CFD Analysis
- Hydraulic calculations
- ETAP power system studies
cOBie Asset Management
Equipment and asset data from the model is handed over in cOBie format, giving operations and maintenance teams a structured record from handover rather than a stack of PDFs.
- Asset data capture
- cOBie-formatted handover
- O&M-ready documentation
Project Monitoring (PMO)
Independent programme monitoring across engineering and construction on energy-sector projects. Baseline, progress, cost, interfaces and risk are tracked in one reporting line, keeping delivery risk visible before it becomes delay.
- Programme tracking & baseline control
- Progress reporting & dashboards
- Cost & schedule monitoring
- Interface management
- Risk register & mitigation tracking
- Document control
Project Management (PMC)
Project management support for energy-sector programmes, keeping contractors, programme, quality and risk under one disciplined process — from award through construction supervision to commissioning and completion.
- Programme control
- Contractor coordination
- Site supervision
- QA/QC oversight
- Risk & change management
- Commissioning coordination
Peer Review Consultation
Independent review of process and utility designs against code and constructability before they're released for construction.
- Design review
- Code compliance check
- Constructability check
Value Engineering
Alternative system and equipment options evaluated against cost, performance and lifecycle impact for energy-sector projects under budget pressure.
- Cost-performance trade-off analysis
- Alternative system evaluation
- Lifecycle cost review
Cost Consultancy
Cost planning and control for energy-sector programmes, from early estimate through to as-built cost tracking.
- Cost planning
- Budget estimation
- Cost control through delivery
Engineering Resource Deployment
Engineering, drafting and modelling resource deployed into client teams on energy-sector projects, scaled up or down as the programme needs.
- Design engineers
- CAD draftsmen
- BIM modellers
- Flexible deployment terms
Oil & Gas projects
Duqm Refinery, Oman
Detailed Engineering · LOD 500 · PETROFAC
Compression 4-NFPS
Process Piping · Offshore · Qatar Energy
Balwin 4 (2 GW)
HVAC & E&I Design · Offshore Platform · Dry Dock World
NER & WICR Site Utilities
MEP Design & BIM · Artelia / NEOM · KSA
STEP (Petrofac)
Peer Review · Petrofac · 2024
Das Island Harbour Expansion & Rehabilitation, Abu Dhabi
MEP Design · Abu Dhabi Oil Company · 2021
Frequently asked
You're newer to oil & gas, so what's your track record?
We've delivered detailed engineering and high-LOD modelling on Yamal LNG, the Duqm Refinery and offshore work for L&T / Qatar Energy and Dry Dock World, for clients including ADNOC, Petrofac and TECHNIP.
What 3D modelling detail do you deliver for energy projects?
Up to LOD 500, fabrication- and construction-ready models, as delivered on Yamal LNG and the Duqm Refinery.
Do you work on offshore as well as onshore facilities?
Both. Recent offshore work includes living-quarters piping for Compression 4-NFPS and HVAC/E&I for the Balwin 4 platform, alongside onshore LNG and refinery projects.
